How To Set Mmsi, Imo No., Name And Call Sign - Furuno FA-150 Installation Manual

3. SETTING AND ADJUSTMENT
3.2

How to Set MMSI, IMO No., Name and Call Sign

1. Display the [INITIAL SETTINGS] menu referring to step 1 tostep 3 in "How to set
blue sign status" on page 2.
2. [SET MMSI] is selected; press the ENT key to display the [SET MMSI] window.
3. [MMSI] is selected; press the ENT key. Use the cursor pad to set MMSI no., in
nine digits, as follows:
1) The cursor is selecting the 1st digit place of the MMSI no. Press  or  to
select the 1st digit of the number. Pressing  displays alphanumeric charac-
ters cyclically in order of blank space, alphabet, numerals and symbols.
2) Press  to shift the cursor to the adjacent place, then use  or  to select
the 2nd digit.
3) Repeat step 1) and step 2) to finish entering the number. To erase a charac-
ter, insert a space.
4) After entering all digits, press the ENT key to register input.
4. Enter IMO number, name of your vessel and call sign, similar to how you entered
MMSI. For the Inland AIS, additionally enter ENI no.
IMO: Nine digits. If the IMO number has 7 digits, enter "0" twice followed by IMO
number. If the ship has no IMO number, enter nine zeros.
ENI: Eight digits
5. After entering data, press the MENU key to close the menu.
Note: If you enter incorrect data, do the procedure from step 1.
3-4
[INITIAL SETTINGS]
SET MMSI SET MMSI
SET INT ANT POSN
SET EXT ANT POSN
SET SHIP TYPE
SET I/O PORT
SET LR CH*
SET BLUE SIGN SW
[SET MMSI]
MMSI : 000000000
NAME :
CALL SIGN:
IMO NO. : 000000000
QUIT [MENU]
SET MMSI (Class A)
*: Availability depends on
equipment specifications. Not
shown unless so equipped.
Appears for Inland AIS only
[SET MMSI]
MMSI : 000000000
NAME :
CALL SIGN:
IMO NO. : 000000000
ENI : 00000000
QUIT [MENU]
SET MMSI (Inland AIS)