Uais Transponder - Furuno FA-150 Installation Manual

1.3

UAIS Transponder

Mount the transponder, where it is protected from rain and water splash. This unit can
be installed on a bulkhead. Install it, referring to the outline drawing.
When selecting a mounting location for the transponder, keep the following in mind:
• Keep the transponder out of direct sunlight.
• The temperature and humidity should be moderate and stable. (Operating tempera-
ture range: -15°C to +55°C)
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the unit away from electromagnetic field generating equipment such as motor,
generator.
• For maintenance and checking purposes, leave sufficient space at the sides and
rear of the unit and leave slack in cables. Refer to the outline drawing.
• A magnetic compass will be affected if the unit is placed too close to it. Observe the
following compass safe distances to prevent disturbance to the magnetic compass:
Standard compass: 1.2 meters
Steering compass: 0.8 meters
Mounting
Fix the unit with four self-tapping screws.
2-φ7 Fixing holes
180±1
7
180±1
250
1. MOUNTING
100
1-9