Table of Contents
Advertisement
Connections to Other Equipment
Requirement for ferrites on non-Furuno cables. If
your Furuno equipment is to be connected to other
equipment using a cable not supplied by Furuno, a
suppression ferrite MUST always be attached to the
cable near the Furuno unit.
Product disposal
Dispose of this product in accordance with the
WEEE Directive.
The Waste Electrical and Electronic Equipment
(WEEE) Directive requires the recycling of waste
electrical and electronic equipment. Whilst the
WEEE Directive does not apply to some Furuno
products, we support its policy and ask you to be
aware of how to dispose of this product.
Warranty registration
To register your Furuno product ownership, please
visit www.FurunoUSA.com and register online.
It is important that you register your product to
receive full warranty benefits. Your unit package
includes a bar code label indicating the serial
number of the unit. You will need this serial number
when registering your product online. You should
retain the label for future reference.
IMO and SOLAS
The equipment described within this document
is intended for use on leisure marine boats and
workboats not covered by International Maritime
Organization (IMO) and Safety of Life at Sea
(SOLAS) Carriage Regulations.
Technical accuracy
To the best of our knowledge, the information in this
document was correct at the time it was produced.
However, Furuno cannot accept liability for any
inaccuracies or omissions it may contain. In addition,
our policy of continuous product improvement may
change specifications without notice. As a result,
Furuno cannot accept liability for any differences
between the product and this document. Please
check the Furuno website (www.FurunoUSA.com)
to ensure you have the most up-to-date version(s)
of the documentation for your product.
Advertisement
Table of Contents
