Safety Instructions - Furuno FA-150 Installation Manual

SAFETY INSTRUCTIONS

The installer must read the safety instructions before attempting to install this equipment.
WARNING
CAUTION
Warning, Caution
WARNING WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel should work
inside the equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water
splash.
Water in the equipment can result in
fire, electrical shock or damage the
equipment.
Be sure that the power supply is
compatible with the voltage rating of the
equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
The voltage rating of the equipment
appears on the label above the power
connector.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Prohibitive Action Prohibitive Action
CAUTION CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
FA-1501
1.2 m
UAIS Transponder
FA-1502
0.45 m
Monitor unit
GVA-100
0.3 m
DB-1
0.3 m
PR-240
0.9 m
Attach securely protective earth to
the ship's body.
The protective earth is required to the
power supply to prevent electrical
shock.
Steering
compass
0.8 m
0.3 m
0.3 m
0.3 m
0.6 m
i