Power Supply (Option); Pilot Plug (Option) - Furuno FA-150 Installation Manual

1. MOUNTING
1.4

Power Supply (option)

When selecting a mounting location for the unit, keep the following in mind:
• Keep the unit out away from areas subject to water splash.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• A magnetic compass will be affected if the unit is placed too close to it. Observe the
following compass safe distances to prevent disturbance to the magnetic compass:
Standard compass: 0.6 meters
Steering compass: 0.9 meters
Fix the unit with four self-tapping screws (4x16) to a desktop or the deck as shown in
the figure below. It is not necessary to open the cover.
1.5

Pilot Plug (option)

The pilot plug should be mounted near where the pilot steers the ship. This plug is
used to connect a PC to display AIS information for use by the pilot. Refer to the out-
line drawing at the back of this manual for mounting dimensions.
1-10