Specification - Hyundai HYT2622-II User Manual

6.1. Emptying the fuel tank.
6.1.1. Place the machine on even and stable surface. Warm up the engine for several minutes and
then stop it.
6.1.2. Loosen the fuel tank cover and remove it.
6.1.3. Drain fuel into a container thoroughly.
6.1.4. Press the intake pump several times until fuel begins to empty the bulb.
6.1.5. Drain fuel again.
6.1.6. Reinstall the fuel tank cover. Store the machine, operating instructions and where necessary
the accessories in the original packaging. In this way you will always have all the information
and parts ready to hand. Pack the device well or use the original packaging in order to avoid
transit damage.
6.1.7. Store the machine in dry and well ventilated surroundings and with the fuel tank empty.
6.1.7.1.
Failure to do so may cause corrosion to the carburettor.

7. SPECIFICATION

MODEL
Engine Type
Engine Size cc
Fuel tank capacity ml
Noise Level dB
Rated Speed rpm
Rated Power kw
Drive Type
Start Method
Fuel Ratio/Fuel Type
Cutting Width mm /Length mm
/Diameter mm
Hedge trimmers - Recommended
maximum cutting diameter
Gross Weight kg
Dry Weight kg
Fully Assembled Dimensions L x W
x H mm
Extensions mm/kg
Box Dimensions L x W x H mm
Do not store fuel next to the machine.
Mineral 2-stroke oil : 25:1 -
Synthetic 2-stroke oil: 40:1
HYT2318
1E32FN
23
500
111
3200 (Idle)
0.6
Direct
Recoil
550
15
5.8
4.2
980 x 230 x 210
N/A
1010 x 230 x 220
Page 19
HYT2622-II
1E34F-2
25.4
500
112
3200 (Idle)
0.8
Direct
Recoil
Mineral 2-stroke oil : 25:1 -
Synthetic 2-stroke oil: 40:1
660
15
9
6.5
1280 x 230 x 210
N/A
1290 x 250 x 290
Rev 2