Setting The Alarm; Switching The Alarm On / Off - Auriol Z29962C Operation And Safety Notes

Setting the alarm

Q
j
P ress and hold the ALARM button
3 seconds.
note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with aL. Otherwise 0:00 and aL are displayed.
j
P ress the ALARM button
start to flash.
j
P ress the ADJUST button
number.
j
P ress the ALARM button
entry. The minutes start to flash.
j
P ress the ADJUST button
number.
j
P ress the ALARM button,
entry.
j
T he LCD returns to the standard display (Time

Switching the alarm on / off

Q
j
P ress and hold the ALARM button
3 seconds. The set alarm time appears on the LCD.
j
P ress the ADJUST button
on or off.
note: when the alarm is switched on,
displayed above aL.
note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
j
T he alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY
ADJUST
switch the alarm signal off within this time.
note: the alarm rings every day at the set time.
, ALARM
12
13
briefly. The hours
13
to set the required
12
to confirm your
13
to set the required
12
to confirm your
13
13
to switch the alarm
12
or CLOCK
13
for approx.
).
9
for approx.
is
,
11
, to
14
GB/CY 17