Mounting The Product On A Wall - Auriol Z29962C Operation And Safety Notes

The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing
Once the DCF radio signal has been picked up
successfully, the
on the LCD.
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
j
I f the weather station does not work properly, you
can restart it by pressing the ADJUST button
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
tinues, you can also set the time and date manually
(see "Setting the time / date manually").

Mounting the product on a wall

Q
note: You will require an electric drill and a cross-
head screwdriver for this step.
m CaUTIOn! DanGER TO LIFE, RISK OF
InJURY anD MaTERIaL DaMaGE! Read
the operating and safety instructions for your drill
carefully.
WaRnInG!
that you do not hit electricity, gas or water lines when
you drill into the wall. If necessary, check with a pipe
and cable detector before drilling.
14 GB/CY
icon is displayed constantly
15
DanGER TO LIFE! Take care
icon .
15
.
12