Setting Up The External Sensor; Setting Up The Weather Station - Auriol Z29962C Operation And Safety Notes

Setting up the external sensor

Q
Inserting the batteries:
j
R emove the battery compartment cover from
the back of the external sensor.
j
I nsert two 1.5 V
the battery compartment
note: make sure that the polarity is correct. This
is indicated inside the battery compartment
(see Fig. C).
– The external sensor is now ready for operation
and the indicator LED
j
C lose the battery compartment cover.

Setting up the weather station

Q
Inserting the batteries:
j
O pen the battery compartment cover on the
back of the weather station.
j
P lace two 1.5 V
the battery compartment
note: take care that the polarity is correct. This
is indicated inside the battery compartment
(see Fig. B).
j
C lose the battery compartment cover.
As soon as the batteries have been inserted, the
LCD indicates the indoor temperature
humidity . The weather station starts to receive
3
the signal from the external sensor. When it has
successfully received the external sensor signal, the
outdoor temperature
around 1 minute.
note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.
batteries (AA) (included) in
.
27
will flash.
25
batteries (AA) (included) in
.
21
appears on the LCD after
7
27
21
and the
5
GB/CY 13