Alarm; Activate And Deactivate Alarms; Setting The Alarm; Snooze Function (Snooze) - Auriol 4-LD5661-1-2 Usage And Safety Instructions

TOTAL - total (since the radio controlled weather station was put into operation).
You can read off the amount of rain on the rainfall diagram (2) or on the rainfall
display (18).
In a precipitation display mode, press and hold the rain / RESET button (11) to
delete the associated memory data set.
While it is raining, the raindrops flash in the display above the rainfall
diagram (2).

Alarm

Activate and deactivate alarms

In the normal time display, press the Alert button (10) to switch between the
alarms (ALARM 1-alarm 1, ALARM 2-alarm 2, ALERT-rain alarm). In the selected
alarm display mode, press the MODE / 12H / 24H button (12) to switch the
alarm ON. The following appears:
ALARM 1- (8), ALARM 2-
selected alarm display mode, press the MODE / 12H / 24H button (12) to
switch the alarm OFF. The alarm symbols are not visible in the display.

Setting the alarm

In an alarm display mode (ALARM 1, ALARM 2), keep the Alert
button (10) pressed, the hours flash and you set them with the down / rain
gauge query / MAX / MIN button
button (9). Press the Alert button (10) again to confirm the setting. The minutes
flash and can be set in the same way.
Press the Alert button (10) repeatedly until you return to the normal display or
wait 10 seconds.

Snooze function (SNOOZE)

When the alarm sounds, press the SNOOZE / LIGHT button (1) to
temporarily deactivate the alarm. Z
(8), ALERT- (3) in the display. In the
13) or the up / history - / radio restart
(
Z flashes in the display. The alarm will
- 49 -