Network Print Server Part Names - Oki Okilan 7100e+ User Manual

4 Re-attach the rear cover, and fasten it with two screws.

Network Print Server Part Names

CAUTION: Be careful not to pinch the left parallel cable
clamp.
100BASE-TX/10BASE-T Connector
This should be connected using a twisted pair cable.
Switching between 100BASETX and 10BASE-T is
automatic.
STAT Light (red LED)
Flashes when the network print server receives data. If the
network print server detects an abnormality, the STAT light
performs one of the following:
∑ Flashes at fixed intervals
∑ Stays on
∑ Stays off.
|
User's Guide: English 9