Printing With An Okilan 6010E Print Server - Oki POCKET PRINT 6010E User Manual

Section III - NetWare
6. Click OK.
Note: If the Device list box is still empty,
select Find Device. This will allow you to
locate the specific device you are trying to
define. You will be prompted for the
Ethernet address and network number of the
device. A mismatch in the OKI device frame
format may cause the device not to show up
in the Device list box.
7. From the list of OKI devices, select a device
to assign to the object.
8. Enter a name for the new OKI Print Server
object.
9. Select Create.
The new OKI Print Server object should now appear in
the directory tree.
Printing with an OkiLAN 6010e Print
Server
To configure the NetWare environment for printing to
an OkiLAN 6010e print server, follow these steps:
1. Install the OkiLAN 6010e hardware and
connect the cabling. Instructions for hard-
ware installation are found in Section I of
this manual.
2. Create an OKI Print Server object. If you are
unfamiliar with how to do this, see the
previous section.
III - 36 OKI OkiLAN 6010e User's Guide