Verifying That The Printer Is Connected; Novell Directory Services (Nds); Setting Up The Network Print Server Using Okiview - Oki Okilan 7100e+ User Manual

9 Highlight the server you created and click Add/Delete
Queue. The Add Queue dialog appears.
10 Check the desired queue
new queue and click OK.
11 Click Apply.
12 Click OK.
13 Click Yes to reset the printer.
!
The fax machine must be reset for your setup to take
effect.
It may take a few minutes for the configuration to become
valid. The queue's icon changes from gray to full color when
the configuration is complete.

Verifying that the Printer is Connected

After you configure the network print server, you can verify
that your fax machine has made a connection to the NetWare
server. You can do this at the NetWare server itself.
1 At the server prompt type LOAD MONITOR.
2 When the NetWare monitor loads under Available
Options, select Connection Information.
3 The Active Connections box opens. In this box, look for
the Print Server name that was specified in OKIVIEW 32.
4 If the Print Server name is there, your connection is made
and you are ready to set up your clients.
|
40 Network print server
or click New Queue to create a

Novell Directory Services (NDS)

OKIVIEW 32, creates the Print Server, Print Queues and
Printer objects for you to make setting up you printer
effortless.
!
NDS is not supported by NetWare 3.x and lower versions.
Setting up the Network Print Server using
OKIVIEW 32
You must log on to the NDS network from a Windows 95/98
or NT NetWare client with an account with administrative
privileges.
1 Open OKIVIEW 32. The main screen displays all of the
print servers on the network, along with their status.