Oki FAX 5780 Options Manual page 53

When you start OKIVIEW 32, you will see a list of the
Network Cards connected to the printers and facsimiles.
Check the MAC addresses of the printers and facsimiles to
identify the Network Card you want to configure.
!
The Network Card Report provides the MAC address as
explained earlier.
Next, select the Network Card you wish to configure.
Then go to MENU, then Setup, then Device Setup.
You can change the following settings.
Status
Name
Location
Network
Protocols
TCP/IP
RAPP, BOOTP, DHCP
IP Address, Subnet Mask, Default Gateway
Primary DNS, Secondary DNS
NetWare
AppleTalk
NetBEUI
Frame Types
Internet
Host Name
E-Mail Address
DSN
DNS (Primary/Secondary)
SMTP
POP3
Factory Defaults, Reset Device
!
You can use OKIVIEW 32 to adjust the settings for User
Function 98, Network Settings.
See the OKILAN 7100e+ User's Guide, "OKILAN
Configuration, Setting Up the OKILAN 7100e+ Using
OKIVIEW 32" or the OKIVIEW 32 on-line Help.
T.37 Option Guide: English
|
53