Sending To A Non-Programmed E-Mail; Limitations And Suggestions - Oki FAX 5780 Options Manual

Sending to a Non-Programmed E-mail

Also known as Numeric Keypad (Walk-up) e-mail faxing
If you want to send an Internet Fax, but you do not want to
program the e-mail address as a One-Touch or Speed Dial,
you must make sure that it is sent as an Internet Transmission.
1 Load the document.
2 Press the e-mail key.
3 Input the e-mail address.
!
One-Touch Key 32 is the @ symbol.
Use One-Touch Key 31 (Caps) to switch between upper
and lowercase letters.
4 Press Start.
|
64 OKIFAX 5780/5980

Limitations and Suggestions

If you need a digital copy of a fax transmission for your
records, send the fax to the destination and your e-mail
address. Your e-mail address will receive a digital copy
(.TIFF or .PDF format) of whatever you send.
If you select the same e-mail address twice, the document
will be sent to it only once.
To stop transmission, press STOP.
The transmission terminates immediately, without asking
for confirmation.
Internet Fax data is scanned into memory before
transmission. If the document is too long to fit into
memory, divide it and make two or more transmissions.
If you frequently divide documents, consider installing
additional memory.