Appendix. Remote Power Switching - Black Box ServSwitch KVM2016A Multiuser User's Manual

Appendix. RPS (Remote Power Switching)
The remote power switch port pinning is shown in Table A-1. A RJ-12 to DB9
cable pinning is shown in Table A-2.
Table A-1. Remote power switch port pinning, RJ-45 connector.
To interface the RPS port with a computer's DB9 male serial port, you can use
the following pinning for an RJ-12 to DB9 cable.
Appendix: RPS (Remote Power Switching)
Table A-2. RJ-12 to DB9 cable pinning.
RJ-11 male
2 (TX)
3 (RX)
5 (GND)
724-746-5500 | blackbox.com
3 (TX)
4 (RX)
6 (GND)
DB9 female
2 (RX)
3 (TX)
5 (GND)
Page 43