ServSwitch Multiuser
13. Restore Factory Settings
You can restore the ServSwitch Multiuser unit to the factory settings. This
restores the original ServSwitch parameters, resetting all the information added by
the administrators, including network settings*, servers, users, and passwords.
*
You have the option to preserve network settings—this is explained below.
WARNING: Once reset the data cannot be retrieved.
To restore factory settings:
1. From the menu select Restore Factory Settings. Restore Factory Settings appears.
See Figure 13-1.
2. Check the box if you want to preserve Network settings.
3. Click on the Restore button. The unit restarts.
Page 32
Warning:
All device data will be lost!
Are you sure?
Preserve network settings
Restore
Figure 13-1. Restore factory settings.
724-746-5500 | blackbox.com