Table of Contents
Advertisement
18.7 DDC
Display Data Channel (DDC) is a VESA standard for communication between a
monitor and a video adapter.
From the Settings window, input the DDC information of the monitor connect-
ed to the switch into the memories of all connected SAMs when first installing the
system.
To input the DDC information:
Press F10. "Please wait" flashes a few times and disappears. The monitor's DDC
information is sent to all SAMs and stored in their memory.
Updating the DDC information
Update the DDC information in any of the following circumstances:
• When replacing the monitor connected to the Multiuser
• When adding a new SAM to the system
• When reconnecting an existing SAM that was temporarily used in a different system
To update the DDC information, repeat the steps as described above.
18.8 Saving Changes to the Settings
To save changes to the settings and return to the Main window, press Esc.
Chapter 18: Operating the System via the OSD
724-746-5500 | blackbox.com
Page 41
Advertisement
Table of Contents
