Configuring The System; Connecting The Local Area Network (Lan); Setting Network Parameters Via The Osd - Black Box ServSwitch KVM2016A Multiuser User's Manual

5. Configuring the System

Configuring the system includes assigning server names, user and security set-
tings, and maintenance.
5.1 Connecting to the Local Area Network (LAN)
Configure the unit via a web interface. Connect a network cable to the LAN
port of the ServSwitch Multiuser.

5.2 Setting Network Parameters via the OSD

By default, the ServSwitch Multiuser boots with an automatically assigned IP
address from a Dynamic Host Configuration Protocol (DHCP) server on the net-
work. The DHCP server provides a valid IP address, gateway address, and subnet
mask.
You can identify the IP address from the OSD. Where there is no DHCP server,
set the IP address via the OSD as follows:
1. From the local keyboard, press left Shift twice. The OSD Main window appears.
See Figure 5-1.
Figure 5-1. Main menu.
724-746-5500 | blackbox.com
Chapter 5: Configuring the System
Page 17