Table of Contents
Advertisement
18.4 Moving the Confirmation Label – F1
The confirmation label appears for 30 seconds. It shows which computer is cur-
rently accessed and can be positioned anywhere on the screen.
To position the label from the Main window:
1. Navigate to a computer line using the Up and Down arrow keys.
2. Press F1. The selected screen image and Confirmation label appear.
3. Use the arrow keys to move the label to the desired position.
4. Press Esc to save and exit.
18.5 Tuning – F5
You can tune the image of any computer screen from the Main window.
To adjust the screen image:
1. Navigate to the computer line you wish to adjust.
2. Press F5. The screen image of the selected computer appears, together with
the Image Tuning label, see Figure 18-4.
Black Box ServSwitch Multiuser
Equalize:
3. Adjust the image by using the Right and Left Arrow keys.
4. When the image is satisfactory, press Esc.
NOTE: Picture quality is relative to distance. The further away a computer is
from the Multiuser, the lower the image quality, and the more tuning is
needed. So place the higher resolution computers closer to the Switch.
Chapter 18: Operating the System via the OSD
Figure 18-4. Image Tuning label.
724-746-5500 | blackbox.com
TUNING
050
Page 39
Advertisement
Table of Contents
