LifeSpan TR5000i Owner's Manual page 33

I. Heart Rate - Your measured heart rate using the hand pulse sensors
located on the front handlebars or chest strap.
Date - The date is presented as the month/day/year below the program
J.
matrix.
K. Time - The time of day is shown below the program matrix using a 24-
hour reading.
Indicator icons:
L.
Lube - This icon illuminates after 100 hours of use showing it's time
to lubricate the treadmill belt (please refer to the Maintenance and
Tips section for lubricating instructions).
USB - This will light up when your exercise data is being transferred
to a USB flash drive.
Cooling Fan - Indicates the fan is on - low, medium or high.
Bluetooth - Flashes when pairing with a mobile device.
HRC - This icon flashes when your pulse is being taken.
!
CAUTION: The Intelli-Guard feature will automatically be disengaged
when the treadmill is operated at speeds under 1.0 mph (1.6 kph). If
the speed is within this parameter "Step" will flash. When the "Step"
is flashing, the treadmill will not automatically pause. If the speed is
above 1.0 mph (1.6 kph) Intelli-Guard™ will not activate until 25 steps
are taken and counted.
!
CAUTION: At 20 seconds the console will beep once per second
for 5 seconds and then automatically pause the treadmill. These
beeps are a notice that the treadmill belt is about to stop. If for some
reason you are still on the treadmill when this occurs move your feet
to the side rails and prepare for the belt to stop. The Intelli-Guard
feature does not replace the use of your Safety Key or using proper
precaution in stopping the treadmill when it is not in use.
Console Basics
31