MIDI Scope
This small utility is used for monitoring MIDI data, either coming into the SP2 or being
produced by the instrument itself. Whenever you play a key or controller or send and receive
any MIDI data, the data show up on the display. You can monitor if the SP2 properly receives
incoming MIDI data. When you select MIDI scope, the display will show "ScP" ( scope )
message. The [+/Yes] button will clear the display. "Nte" means note message and "Ctl" means
control message. This can be highly useful for diagnosing problems or monitoring MIDI data
flow especially when the SP2 is transmitting MIDI control message.
< Figure 5‐9 >
Chapter 5
Global
5-5