Chapter 3
SP2 Performance Features
Performance / Effect
MIDI controller mode
‐ Knobs A‐D control MIDI control change depending on the current program.
Zone Volume mode
‐ Knobs A‐D control volume level of each layer.
Effect Wet / Dry mode
‐ Knobs A‐D control the wet / dry mix of FX blocks.
Knob Mode / Tap Tempo Button
‐ Knob Mode / Tap Tempo button is used for selecting Knob Mode or setting the tempo of the
internal metronome / rhythm patterns in realtime by tapping it.
Global
The Global menu provides several parameters that you can control the SP2 with. In the Global
menu, you can make changes that affect the entire SP2, for example, Local on / off, Drum Map,
Drum Channel, Tuning, SysEX dump, MIDI scope, Reset, and more.
Effect (Effect, Reverb)
The SP2 provides more than 50 types of effects including reverb, delay, chorus, flanger, phaser,
tremolo, panner, distortion, compressor, rotary speaker simulator, sound enhancer, waveform
shaper, and more. There are 30 of preset reverb. For more detailed information, please read
page 7‐1
Front Panel
3-2
< Figure 3‐1 >