9.
If you start the MIDI file player and still the display shows "u.O.S.", it means that the
data is not being sent to the SP2 properly.
10. In this case, make sure the MIDI connection and the MIDI file player setting from the
computer is correct one more time.
11. If everything works well, the loading may take up to 18 minutes. After the software
loading is completed, the display will show "OK" message which means that the
software upgrade has been successfully done.
12. Turn power off then on.
13. Now, the software upgrade is completed successfully and your SP2 will start with the
new operating system and / or features. Please, refer to the Read Me File included in
the software upgrades.
< Figure 6‐4 The "OK" message >
Chapter 6
Update
6-3