4.
Select Zone Volume mode with [Knob Mode] button. Use knob 1‐2 to adjust the volume
level of each sound. Set Main volume level to 110 and Layer volume level to 100.
5.
Press [Store] button in the Edit region and press [Yes] button below the display. The SP2
will ask you once more to be sure. One more press of [Yes] button will complete the
saving procedure and the display will show "q01" indicating the slot number you just
stored your program in. You can select one of the stored programs with [Q.Access]
button at any time.
< Figure 8‐5 >
< Figure 8‐6 >
Chapter 8
Tutorial
8-3