Chapter 8
Tutorial
2.
Press [Layer] button located on the left side of the display. This will change the LED on
the [Program] button from red to amber and "L26" will appear on the display. The color
change of LED means that the SP2 is in Editing mode and "L26" indicates that program
number 26 is ( L )ayered.
3.
Press [Drum/Perc] button in the category region and press [Enter] button. The "L26" on
the display will change to "L64" ( Vibes ).
8-2
< Figure 8‐2 >
< Figure 8‐3 >
< Figure 8‐4 >