Kurzweil KME61 Musician's Manual page 45

5. One more push of [Main] button will turn off the LED on the button and the Main
sound will be muted. The display will indicates this by showing a dot ( . ).
Split
Splitting is playing two or more programs on different parts of the keyboard. For example,
using the split feature, you can play a piano sound in the upper register and bass sound in the
lower register within a single SP2 instrument. Pressing [Split] button will flash the LED on it
and the display will look like < Figure 4‐4 >.
You can select a split sound with Sound Select button like when you select sounds for layering
and the SP2 splits the keyboard at a predetermined point which by default, is Ab3.
♦ Split Point
If you want to change this automatic split point, press and hold down [Layer] and [Split] button
at the same time. The SP2 will indicate the current split point in the display. Trigger a key which
you want to be a new split point. That's it. You have a new split point.
Also, [Layer] button and [Main] button can be used to change or mute the corresponding
sounds. As you see in < Chart 4‐1 >, the display indicates mute status with a dot (.).
< Figure 4‐4 The display indicates that the added split is 053 Bass Guitar >
< Figure 4‐5 Split Point >
< Figure 4‐3 >
Chapter 4
Programming SP2
４-3