Kurzweil KME61 Musician's Manual page 64

Chapter 6
Update
Installing Software Upgrades
1. After powering on, when three dots on the display are blinking, press the [Transpose]
button.
2. The display will show "uOS" ( Update OS ) message.
3. If you want to move to another menu, use [+/Yes] or [‐/No] button.
4. From now on, pressing [Metronome] button means "Yes" and pressing [program]
button means "No".
5. Thus, if you decide to install software upgrades, press [Metronome] button while the
display is showing "uOS".
6. Then, the display will show "u.O.S." that means the SP2 is now waiting for the data
transmission.
7. Start playing the MIDI file containing new software from the sequencer, or a MIDI file
player such as Windows Media Player.
8. If the SP2 is receiving the MIDI data correctly, the display will shows "1‐r" like <
Figure 6‐3 >.
６-2
< Figure 6‐1 >
< Figure 6‐2 >
< Figure 6‐3 >