Step 3: Make The Port Settings For The Software Rip - Roland Soljet EJ-640 Setup Manual

3.
Set the gateway address.




 
Repeat and


Press

Step 3: Make the Port Settings for the Software RIP

The settings for the software RIP will be made here. For information about how to make the settings, refer to
the documentation of the instructions for the software RIP.
Confirming that a network connection has been established
Roland VersaWorks
You can use the printing-test feature to check whether the connection to the network has been established.
For information about how to carry out a printing test, refer to the documentation for Roland VersaWorks.
Other software RIP
Refer to the documentation for the software RIP you are using.
From the screen displayed in
twice.
Press
Press
[GATEWAY ADDR.]: 255.255.255.255
For the value to enter for the gateway address, consult your network
administrator. Here, "255.255.255.255" is entered by way of example.
Press

to set the gateway address numbers.
When you have finished making the setting, press
to go back to the original screen.
twice.
to select the address number.
.
.
5. Network Settings
1.

- , press
37