Roland Soljet EJ-640 Setup Manual page 34

4. Assembly and Ink Filling
w
EJ 4 COLOR:
EJ 7 COLOR:
x
After this, the next step is to adjust the media holder adjuster. This procedure will be performed
by a Roland DG service technician, so leave it up to them.
32
When the screen on the left is displayed, discard the
discharged fluid from the drain bottle.
Be sure to discard the fluid. If the fluid is not discarded at this stage,
the discharged fluid may overflow.
Attach the drain bottle, and then press
When the screen on the left is displayed, insert ink
cartridges into the slots whose numbers are flashing.
When the screen on the left is displayed, discard the
discharged fluid from the drain bottle.
Be sure to discard the fluid. If the fluid is not discarded at this stage,
the discharged fluid may overflow.
Attach the drain bottle, and then press
When the screen on the left is displayed, make sure the
drain bottle is not overflowing with discharged fluid, and
then press .
When this screen appears, filling with ink is finished.
.
.