Step 2: Attaching The Machine - Roland Soljet EJ-640 Setup Manual

4. Assembly and Ink Filling

Step 2: Attaching the Machine

Procedure

Place the machine on the stand.
Arrange the stand so that the bent side of the tabletop plates (

Tighten the bolts in the two locations on the back and then in the two locations on the
bottom in the order of
First tighten the bolts temporarily in the order of
Tighten
temporarily
Bolts: 8
Washers (silver): 8)
Tighten fully
14
, to secure the machine to the stand.
, , and then tighten the bolts fully in the same order.
) are in the back.