Roland Soljet EJ-640 Setup Manual page 32

4. Assembly and Ink Filling
3.
Perform the initial cleaning.


w
Next, follow the instructions on the screen to clean the print heads in the order of "3
and 4," "5 and 6," and "7 and 8."
Remove and insert the SOL INK cleaning cartridges for the numbers indicated on the screen. Inserting
cartridges in the incorrect slots will cause the ink filling operation to fail.
When removing cartridges
When inserting cartridges
30
Insert SOL INK cleaning cartridges into slots 1 and 2.
Remove and insert the SOL INK cleaning cartridges ac-
cording to the instructions shown on the screen.
On the "FILLING INK..." screen, the remaining time of the process is
displayed. ("03:45" = "3 minutes and 45 seconds")
REMOVE SOL CL
12
Flashing
REMOVE SOL CL
12
Flashing
REMOVE SOL CL
Remove
12
Turns off
REMOVE SOL CL
Insert
12
Turns on