Roland Soljet EJ-640 Setup Manual page 27


Connect both the power cord and the Ethernet cable (commercially available).
Use a power plug adapter if the electrical outlet is a two-prong outlet.
WARNING
WARNING
WARNING
CAUTION
w
Pass the cables through the cable clamp.
Ethernet cable
(Category 5 or higher)
Never insert a
telephone cable.
Connect the machine to an electrical outlet that complies with this ma-
chine's ratings (for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
This can prevent fire or electrical shock due to current leakage in the event of
a malfunction.
Perform this task with all power switches left switched off.
Failure to observe these instructions may cause the machine to move sud-
denly, resulting in injury.
Never insert your hand or fingers into the opening of the front cover.
The print head carriage moves at high speed inside the cover. Coming into
contact with the moving carriage may cause injury.
Pass the cables through here.
Cable clamp
Ethernet (1000Base-T recommended)
Electrical outlet
Power cord
Cable clamp
4. Assembly and Ink Filling
Ethernet cable
Power cord
25