Table of Contents
Advertisement
4. Assembly and Ink Filling
2.
Attach the media holders.
Place the shafts on the arms.
First insert the shafts into the holes on the right side as seen from the rear of the machine, and then
place the shafts into the holes on the left side.
So as to not interfere with the machine, raise the front shaft up and pass the shaft
through the right media holder.
Pass the shaft through from the left as seen from the rear of the machine.
Pass the front shaft through
the media holder.
18
Catch the media holder on
the rear shaft.
Hide quick links:
Advertisement
Table of Contents
