Step 3：Make The Port Settings For The Software Rip - Roland Texart RT-640 Setup Manual

6. Network Settings
Step 3：Make the Port Settings for the Software RIP
The settings for the software RIP will be made here. For the setup procedures, refer to the documentation
of the instructions for the software RIP.
Confirming that a network connection has been established
Roland VersaWorks
You can check whether the connection to the network has been complete by using the printing-test
feature. For the information on the method to conduct a printing test, refer to the documentation for the
Roland VersaWorks
Other software RIP
Refer to the documentation for the software RIP of your own.
36