Step 9: Ink Filling - Roland Soljet EJ-640 Setup Manual

4. Assembly and Ink Filling
w
x


Step 9: Ink Filling

1.
Select the ink type.

Ink type
EJ 4 COLOR
EJ 7 COLOR

Press
w
x

28
When the screen on the left is displayed, select the desired
language, and then press
Press
unit, and then press
Select the desired temperature unit in the same way, and
then press
Press
cyan, magenta, yellow, and black
cyan, magenta, yellow, black, light cyan, light magenta, and
light black.
Confirm the ink type, and then press
[YES].Press
If the ink type is incorrect, select [NO], and then press
start again from step
Make sure the drain bottle is installed, and then press
.
When the screen on the left is displayed, remove the
right cover.
Press the part in the following figure until it clicks. Lightly pull the
cover in the direction indicated with
by raising it in the direction indicated by
or to select the desired length
.
.
or to select the ink type.
Colors used

.
.
to select
, and then remove the cover
.
to