Step 3 : Make The Port Settings For The Software Rip - Roland SOLJET Pro 4 XF-640 Setup Manual

3.
Set the Gateway Address.

NETWORK
IP ADDRESS

NETWORK
GATEWAY ADDR.

GATEWAY ADDR.
000 . 000 . 000 . 000

GATEWAY ADDR.
255 . 000 . 000 . 000
 
Repeat and

GATEWAY ADDR.
255 . 255 . 255 . 255
{
Press

Step 3 : Make the Port Settings for the Software RIP

The settings for the software RIP will be made here. For the output destination, use the IP address set for the
machine. For the setup procedures, refer to the documentation of the instructions for the software RIP.
You can check whether the connection to the network has been complete by using the printing-test feature
of the software. For the information on the method to conduct a printing test, refer to the documentation
for the software RIP.
From the screen displayed in
Press
Use
[GATEWAY ADDR.] : 255.255.255.255
For the value to enter for your gateway address, consult your network
administrator Here, "255.255.255.255" is entered by way of example.
Press

to set the gateway address numbers.
When you finish making the setting, press
in this order to go back to the original screen.
1.
|
-
twice.
to select the address number.
.
6. Network Settings
, press twice.
.
43