Table of Contents
Advertisement
Tighten the bolts in the order of
Tighten fully
Bolts: 4
z
Assemble the opposing leg by following the same procedure from step
Position the stand legs parallel to each other and separated by approximately 1,800
mm (70.9 in.).
Position the legs so that the U-shaped brackets face the inside and the bent side of the tabletop plate
faces down for each leg.
,
to secure the plate.
Set this part on
the bottom.
4. Assembly and Ink Filling
to step
U-shaped
bracket
Set this part on
the bottom.
.
11
Hide quick links:
Advertisement
Table of Contents
