Verify And Complete The Installation From Your Browser - PiXORD P-463 User Manual

Opening the Web-based UI of the Selected NDC
1. To access the Web-based UI of the selected unit, run the View > Open Web on IP installer menu bar.
2. If the device has been configured correctly, the default Web browser will open to the home page of the
selected device.
3. If you find your browser is opened and automatically connected to the NDC Home Page, it means you've
assigned an IP Address to the unit successfully. Now you can close the IP Installer and start using your NDC.

Verify and Complete the Installation from Your Browser

Start your browser and enter the IP Address of your NDC in the Address field.
The NDC can support Microsoft Internet Explorer
Microsoft Internet Explorer
When browsing the Home Page at the first time with the Microsoft Internet Explorer
your security settings to perform a one-time-only installation of the ActiveX component onto your workstation, as
described below.
1. From the Tools menu, select [Internet Options]
2. Click the [Security] tab and then click [Custom Level] button to see your current security settings.
3. Set the security level to Low and click [OK].
4. Type the URL or IP address of your NDC into the Address field.
TM
TM
.
28
TM
and Netscape . But the voice feature can only be run under
TM
, you must temporarily lower