Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PiXORD P606
Summary of Contents for PiXORD P606
- Page 1 P-606(W) Quick Guide 1. Hardware Connection P-606(W) – Physical Overview...
-
Page 2: Software Installation
P-606(W) – Physical Connection 1. Prepare a PC with Ethernet link to the network 2. Connect LAN port (RJ45) of the camera to a network switch/hub 3. Connect power jack 4. Ensure the power adaptor specification matches the power system (110V or 220V) and connect the adaptor to the outlet 5. - Page 3 Using IP Installer to Assign IP Address Once IP Installer has been successfully installed on the PC, double click to run the software. Click the menu bar [Tool] > [Search Network Device] to search the device in the LAN. Select device with the MAC Address corresponds to the camera that is to be configured. MAC Address Double click the item to open the Property Page or click the menu bar View >...
- Page 4 Modify the network settings of the camera. After filling in the properties, click [Synchronize] button to complete the configuration...
- Page 5 settings then click [OK] button to save in the PC. Open the Web-based UI...
- Page 6 To access the Web-based UI of the selected unit, run the View > Open Web on the menu bar. For first time user, there will be a prompt to install the ActiveX control. Confirm the installation as it is required to view the video stream and some operations.
- Page 7 If the device has been configured correctly, the default Web browser will open to the home page of the selected device. * Username and password is required. (Default is admin / admin) Verify and Complete the Installation from Your Browser If not able to get the ActiveX download properly, user must temporarily lower your security settings to perform a one-time-only installation of the ActiveX component onto your workstation, as described below:...
Need help?
Do you have a question about the P606 and is the answer not in the manual?
Questions and answers