Table of Contents
Advertisement
Setting Preset Group
The purpose of setting preset group allows the management of the 16 preset points before auto scanning. The first 16
preset points of each dome are separated in 4 groups.
Group 1 includes: 1st, 2nd, 3rd and 4th preset points.
Group 2 includes: 5th, 6th, 7th and 8th preset points.
Group 3 includes: 9th, 10th, 11th and 12th preset points.
Group 4 includes: 13th, 14th, 15th and 16th preset points.
Preset Group must be set for the auto pan reference.
To set up group 1: Push key 1 followed by F4 key.
Example:
To set Group 1
To set Group 2,3
To set Group 3,4
To set Group 1,2,3
To set Group 2,3,4
To set Group 1,2,3,4
Changing Preset Data
In order to change any preset point from the one stored, the dome must first be sent to that preset point.
To change the 4th preset point of the Dome number 3, perform the following steps:
1.
Push 3 CAM to select Dome 3.
2.
Push 4 PRESET to go to 4th preset point.
3.
Move joystick to bring camera to the desired view point.
4.
Adjusting lens.
5.
Setting preset speed.
6.
Setting dwell time.
7.
Store Data.
PIH-800II
1 F4
1 2 F4
3 4 F4
1 2 3 F4
2 3 4 F4
1 2 3 4 F4
109
PIH-801
1 F4
2 3 F4
3 4 F4
1 2 3 F4
2 3 4 F4
9 9 9 F4
Advertisement
Table of Contents
