Related Manuals for PiXORD P606
Summary of Contents for PiXORD P606
- Page 1 PiXORD H.264 Series 2-Megapixel Compact Network Camera P606 / P606W P607 / P607W User’s Manual Version: 1.2 Date: 12/04/2009...
-
Page 2: Table Of Contents
Contents Notices ..............................2 Introduction............................4 Installation............................5 Using the Web UI..........................10 1. Live View ..........................11 2. Video ............................14 General ..........................14 Advanced ...........................15 3. Camera ...........................16 General ..........................16 Advance ..........................18 4. Event ............................19 Event Server........................19 Motion Detection .......................21 Event Configuration......................23 5. Schedule ..........................24 General ..........................24 Storage ..........................25 6. -
Page 3: Notices
Notices This user manual is intended for administrators and users of the PiXORD P606(IR) and P607(White light) Network Camera, including instructions for using and managing the camera on your network. The use of surveillance devices may be prohibited by law in your country. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. - Page 4 PiXORD is not responsible or liable for the resale of its products with statements different from or beyond the specification/parameters stated by PiXORD. Customers are responsible for their applications using PiXORD products.
-
Page 5: Introduction
Introduction PiXORD P606(IR) and P607(White light) Network Camera delivers superior H.264-AVC performance, state of the art design and function. P606/P607 is specifically adapted for maximum performance indoor applications, such as commercial, banking, government buildings, schools, universities and airports. H.264-AVC video compression can lower bandwidth and storage requirements without compromising image quality;... -
Page 6: Installation
Installation 1. Hardware Connection... -
Page 7: Software Installation
2. Software Installation The following software is necessary for the proper display and use of the P606/P607 from the Web site. The software will be taken from the Software Package CD. IP Installer The IP Installer is used to locate and configure network cameras and video servers on the LAN. This utility is useful for conveniently configuring the network settings of the device, or for finding a device once the network settings have been modified. -
Page 8: Network Configuration
*0004290000 Although the IP Installer is able to find and configure any P606/P607 in the LAN except those that are behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-based user interface of the camera, the host PC must be in the same subnet. - Page 9 From the list, select the device with the MAC Address that corresponds to the P606/P607 that is to be configured. The MAC Address is identical to the unit’s S/N (Serial Number). Double click the item to open the Property Page for the selected device or click the menu bar View >...
- Page 10 Open the Web-based UI of the Selected camera To access the Web-based UI of the selected unit, run the View > Open Web on the menu bar. If the device has been configured correctly, the default Web browser will open to the home page of the selected device.
-
Page 11: Using The Web Ui
Using the Web UI Start your Web browser and enter the URL or IP address in the Address field. The Home page of the camera is now displayed. -
Page 12: Live View
1. Live View Bit rate Video format Date Resolution Frame Rate IP address of the camera Button Description Click for more general/advance camera settings Select languages among English, traditional Chinese and simplify Chinese Check actual size to view the actual size (resolution) of the image Image Setting –... - Page 13 Button Description Full screen Listen the audio input from local end Talk function Record instant live video Snapshot the image Rotate image 90 degrees clockwise...
- Page 14 Configuration Pages List Video General Advance External Video Source Camera: General Advance Event Event Server Motion Detection Event Configuration Schedule General Storage Network General Advance SMTP (E-mail) DDNS Wireless System Information User Date & Time Server Maintenance Log Service Customize Style Layout...
-
Page 15: Video
2. Video General Video General Setting: Check each box to enable streams (max 3) for live viewing Note: Digital PTZ is only available with stream 2 OSD Setting: Enable OSD to display camera name and date/time on the image... -
Page 16: Advanced
Advanced Stream 1 Setting: RTSP Path: It is the stream ID used for RTSP client streaming connection, such as VLC player. (default v00) Resolution: Choose image size from 320x240 to 1600x1200 Video Mode: Choose between variable bit rate (VBR) and constant bit rate (CBR) VBR->... -
Page 17: Camera
3. Camera General... - Page 18 Camera General Setting: Brightness, hue and saturation: Adjust the image for a better view Rotation 180: Rotate the image by 180 degrees, so that the image becomes upside down. This function is useful when camera device must be physically installed in vertically reversed direction. Audio Setting: Audio Enable: Turn on/off the audio Web Record Setting:...
-
Page 19: Advance
Advance White balance: Adjust the white balance according to the environment Exposure: Select the exposure frequency Max Exposure Time: Increase / reduce the exposure time for lens Max Gain Control: image at low light control on how much noises are allowed Illuminator LEDs: Choose among auto, enable and disable. -
Page 20: Event
4. Event Event Server Click on the [Add FTP] to expand FTP server setting FTP Server: Name: Give a name for the FTP server Network Address: Input the network address of the FTP server Upload Path: Choose the desired upload path for events Port: Input the port number of the FTP server... - Page 21 Login Information: Username / Password: Input the username and password of the FTP Click [Remove] to delete selected event servers (circled in red)
-
Page 22: Motion Detection
Motion Detection To add a motion detection area: 1. Click on [Add] to set up a detection area (Set up panel will be expanded) - Page 23 2. Give a name to this window area 3. Select the trigger level and sensitivity for this detection window (0~100, low~high) 4. Select color for detection window 5. Draw detection window on the image 6. Once everything is done, click on [Save] to save the configuration made. Configured detection window will be displayed in motion detection list (circle in blue) Note: Maximum number of detection window is 10...
-
Page 24: Event Configuration
Event Configuration To add an event trigger, click on [Add] and setup panel will be expanded 2. Give a name to this event. 3. Set the time interval between each trigger 4. Set the time period for the trigger. Choose “Always” or “Never” 5. -
Page 25: Schedule
5. Schedule General Define the day (specified by days of a week) and time (specified by each single hour) for that will be recording during the scheduled period. Note that only video data will be recorded. User can select which video stream should be recorded, and the size of each sliced file. -
Page 26: Storage
Storage Display the storage information, includes disk size info, type and status. The warning message shows when recording is on process; SD card should not be removed during the recording process. -
Page 27: Network
6. Network General Device IP configuration, includes DHCP and Static IP setting. “Enable ARP/Ping” enable device to accept ARP or ping packets from the network. Disable this option may provide extra security from intentional ping. Advanced Enable or configure other network functions. NTP: Configure a NTP (Network Time Protocol) server, so that the device system date and time can be synchronized with a specified Time Server. - Page 28 UPnP: Enable UPnP, so that the device can be discovered in an UPnP Compliant Network. NAT Traversal: Enable NAT traversal, so that client from Internet can have access to the devices behind the Router. Note: with UPnP enabled, the IP Sharing device (Router) capable of UPnP function will automatically be noticed with the device’s NAT port.
-
Page 29: Smtp (E-Mail)
SMTP (E-Mail) Configure an email host in the device that will send email on behalf of the configured email account in a circumstance like sending an email notice to a specified mail address (Event Configuration). Sender: Complete the Mail Server, Server Port, Authentication information (if required) and the sender email address. -
Page 30: Ddns
DDNS Dynamic DNS configuration; the network device can be assigned with a host name by registering this service (Internet access required). Host Name: Assigned name that will be used for access to the device User Name/Password: Account authentication for logging to this service Update Time: Periodically, the device updates its access info to sever in the configured time. -
Page 31: Wireless (P606W/P607W)
Wireless (P606W/P607W) Wireless network searching and device configuration page Wireless – List of available wireless networks (Access Points); information includes SSID, Mode, Security and Signal Strength. Wireless Setting: configurations for the camera device for its availability to connect to a wireless network. Clients available in the same network or able to connect to this network can then have an access to the camera device with wireless connection. -
Page 32: Easy Connection
Easy Connection Support remote internet connection, just register online once and save all the trouble with network configuration. - Page 33 Connecting steps: 1. Click ”register this camera” and will be directed to http://pixord.yoics.com 2. Register a new account for new user 3. Login with the created account...
- Page 34 4. Pixord camera will be auto-detected. Follow the steps and click “Continue”.
- Page 35 Click “Next” (circle in red) to see the next tip or click “Skip” (circle in blue) to skip all the tips. 5. Name your camera...
- Page 36 6. A list showing all detected cameras on the left. Click on the camera for viewing.
- Page 37 7. Connecting to the device, input device username and password for viewing.
-
Page 38: System
7. System Information Lists of System and Network configurations... -
Page 39: User
User Login users for Web access and operations; authentication required. The Check box is for anonymous logging on to the live view page. Logging for further configurations will still require user name and password. -
Page 40: Date & Time
Date & Time System date/time configuration. Options of synchronizing with PC and NTP server are provided for automatic adjustment. -
Page 41: Server Maintenance
Server Maintenance This page provides tool for system maintenance; Reboot and Load default settings, as well as functionalities of launching upgrade process, backup/restore user settings and language defines. -
Page 42: Log Service
Log Service Most system operations and / or process will be kept in a log system. The link provides the review of these records. -
Page 43: Customize
7. Customize This page provides the function of adjusting the look of live view page. There are two types of layout settings; use default look or use custom settings. Use Default Look: the default layout of live/configuration pages Use Defined Links: Web link(s) will be presented on the live page when enabled. It can be a link to another IP camera for instance, or other preferred web link. - Page 44 Use Custom Settings: The modifications allowed are change of Background / Text Color, Background picture, Title, Description, Logo and etc.
-
Page 45: Faq
Restore Factory Default To restore factory default, please follow the steps: Unplug the power jack to turn off the power of the camera. Insert a pin into the reset hole as circled with red in the below figures. Sense a button and keep it pressed until instructed to release.