4.4 PTZ Settings
Setting ID for NDC
Select an ID number to match the ID
address set by the dome camera.
Setting Day / Night Mode
– Setting the ID for Network Dome Camera
To select an ID number to match the ID address set by the NDC ID switch:
1.
Click on the arrow button beside Camera ID and select the number from the pull-down list.
2.
Click on [Apply] button to confirm the selection.
Advanced Function Setup for NDC
This pair of buttons is for call out the OSD Setup Menu, and set
up more functions.
43
Managing Preset Points
Managing the Preset Points for quick
view and auto pan.
Changing Lens Speed
Switching the lens speed between
default setting and manual setting.