Table of Contents
Advertisement
Appendix E. Trouble Shooting
No Power
Check power supply connection
Check fuse on the PCB
Check connection between dome and base
No Video
Check camera video output
Check cable (damaged cable)
Check video input connection on monitor
Check 20PIN connection between camera body and base
No Telemetry
Check camera ID switch setting
Check RS-485 cable IN/OUT connection on camera
Check RS-485 cable IN/OUT connection on keyboard
Check if the dome is under Auto Pan mode Please deactivate the Auto Pan
Check if alarm is triggered, Cancel trigger alarm
Poor Focusing
Dusts on dome cover or housing cover. Clean the cover with cotton cloth
126
Advertisement
Table of Contents
