DIP Switch Setting
1.3
Fan Power Switch
Turn the number 2 switch to ON position to activate the internal fan. This will maintain the temperature inside and
make electric parts life.
Alarm Mode Switch
Alarm Mode can be set as Lock or Release mode. Turn number 1 switch to ON position to choose Release mode.
Turn number 1 switch to OFF position to choose Lock mode. The NDC has 6 alarm inputs and 1 output, which
can be set either NC (normally close) or NO (normally open) mode. Turn number 2 switch to NO position to
choose NC mode. Turn number 2 switch to OFF position to choose NO mode.
Camera Function Switch
For P463, P463DW (25X optical lens model) and P463T, please refer to
Advanced Settings for
P463DW" and "8. Advance Settings for P463T" for details.
"6. Advanced Settings for
10
P463",
"7.