Dome Camera Selection - PiXORD P-463 User Manual

Dome Camera Selection

To call out a dome controlling or setting.
To select 1st NDC
Push key 1 follow by CAM key.
To select 64th NDC
Push key 6 then 4 followed by CAM key.
* When matrix system is used, select monitor before camera selection. Please refer to matrix system user manual.
Zoom Lens Control
To Zoom In
Push ZOOM IN key. The viewing angle becomes narrower and target will become enlarged on the screen.
Zooming will stop when the key is released.
To Zoom Out
Push ZOOM OUT key. The viewing angle becomes wider and target will become smaller on the screen. Zooming
will stop when the key is released.
104