Network Configuration - PiXORD P-463 User Manual

Network Configuration

2.4
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network settings of the
NDC. It even provides a convenient way to set the network settings for multiple devices simultaneously using the batch
setting function. Moreover, IP Installer can save the network settings for all devices as a backup and restore them
when necessary.
– Preparation before IP Assignment
Always consult your network administrator before assigning an IP address to your server in order to avoid using a
previously assigned IP address.
Ensure the NDC is powered on and correctly connected to the
network.
MAC Address: Each NDC has a unique Ethernet address (MAC
address) shown on the bottom of the NDC as the serial number
(S/N) with 12 digits (e.g. 000429-XXXXXX).
One final note, although the IP Installer is able to find and configure any NDC on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-based user
interface of the NDC, the host PC must be in the same subnet. For more information about subnets, please
consult your network administrator.
– Using IP Installer
Assigning an IP Address to NDC
1. Once IP Installer has been successfully installed on the computer, double click the IP Installer icon on the
desktop, or select it from Start > Programs > PiXORD Corporation > IP Installer > IP Installer.
2. The IP Installer window is displayed below.
3. Click the menu bar Tool > Search Network Device to search the NDC in the LAN.
26
*000429000094