Table of Contents
Advertisement
3. Network Configuration
IP Installer is a utility that provides an easier and more efficient way to configure the IP address and
network setting of the device. It even provides a convenient way to set the network settings and use the
batch setting function simultaneously. Moreover, IP Installer can save the network settings for all
devices as a backup and restore them when necessary.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
2.
Ensure the camera is powered on and correctly connected to the network.
3.
MAC address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000
B1
4.
Although the IP Installer is able to find and configure any device on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the
web-based user interface of the camera, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to PB670
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the
desktop,
2.
Click the [Device Search] to search the device in the LAN.
8
Advertisement
Table of Contents
