Denon UD-M31 Operating Instructions Manual page 9

(2) Rear Panel
!4
AM antenna terminal
(ANTENNA TERMINAL AM)
• Connect the AM antenna here.
!5
FM antenna terminal
(ANTENNA TERMINAL FM)
• Connect the FM antenna here.
!6
Digital output jack
(DIGITAL OPTICAL OUT)
• Digital data is output in optical form from this jack.
!7
System connectors
(SYSTEM CONNECTOR 1 and 2)
• When connecting the D-M31 series in a system,
connect these connectors to system connectors
on other system components.
(Use the system cords included with the other
components.)
!8
Speaker terminals (SPEAKERS)
• Use these to connect the speakers.
!9
AC OUTLET
• When using in combination with the D-M31
series, connect to the AC outlet on the CD
receiver (UD-M31) or one of the other
components in the D-M31 series.
@0
Power cord
• Plug this cord into a wall power outlet.
@1
PRE OUT terminal (SUB WOOFER)
• Connector jack for subwoofer with built-in
amplifier (super woofer), etc.
@2
LINE OUT (analog output) jacks
• This is an output terminal for recording.
LINE1: Set to "MD" upon shipment from factory.
LINE2: Set to "TAPE" upon shipment from
factory.
• On the UD-M31, settings can be changed
according to the model you have purchased. For
details on changing the settings, see page 12.
@3
LINE IN (analog input) jacks
LINE1: Set to "MD" upon shipment from factory.
LINE2: Set to "TAPE" upon shipment from factory.
• On the UD-M31, settings can be changed
according to the model you have purchased. For
details on changing the settings, see page 12.
(3) Display
• RDS (Radio Data System) When the RDS button is
pressed, a station is searched for and automatically
tuned in, the "RDS" indicator lights and the station's
name is displayed on the frequency display.
• PTY (Program Type) This indicator lights when the type
of RDS program is specified.
• TP (Traffic Program) "TP" lights when an RDS traffic
information station is received.
The selected functions, volume, reception band, reception
frequency, RDS data, time, and timer settings are displayed
here.
The following is displayed in the track number display in CD
mode:
• When the disc's data cannot be read properly ............00
• In stop mode ...........................Total number of tracks
• In play and program modes .....................Track number
The following is displayed in the time display in CD mode:
• When the disc's data cannot be read ..................00:00
• In stop mode .................................Total playing time
• In play and pause modes ...Elapsed time for current track
"P.SET" lights when The timer will
the tuner preset operate when
number is displayed. this is lit.
This lights when
setting the timer.
"TIMER" lights when
the timer is set.
This lights when the "RANDOM" lights
display is set to during random play.
clock mode.
1 (the play indicator) lights
This flashes for approximately
when a disc is playing, and
10 seconds when the
3 (the pause indicator)
MEMORY button is pressed
lights when pause mode is
while presetting stations.
set.
This changes as follows each time the REPEAT button is pressed:
1st press : RPT 1 (single-track repeat) is displayed and the number
2nd press : RPT ALL (1 disc all track repeat) is displayed.
3rd press : Nothing is displayed.
NOTE:
• The timer standby mark (" ") does not light if the current time and the timer have not been set.
ENGLISH
• PS (Program Service name) This lights when the
station name is displayed.
• RT (Radio Text) This lights when the RT mode, and the
RT message is displayed.
• TA (Traffic Announcement) This lights when the TA
mode is selected on.
These display the FM reception mode.
ST : This lights when a stereo program is
received in the FM AUTO mode.
MONO: This lights when a monaural program is
received in the FM AUTO mode and when
the BAND button is pressed, setting the
FM MONO mode.
AUTO : This lights when the BAND button is
pressed, setting the FM AUTO mode.
This lights when This lights when
a station is tuned the TONE is
in properly. adjusted.
This lights when
SDB mode is on.
"PROG" lights during
programmed playback.
"EDIT" lights when
editing cassette tapes.
This lights when the sleep
timer is operating.
Flashes when remote
control signals are received.
of the track to be repeated on the display.
9