Denon UD-M31 Operating Instructions Manual page 16

ENGLISH
The time is displayed in the 24-hour mode.
CD RECEIVER UD-M31
ON / STANDBY
Example: Setting to 19:30 (7:30 p.m).
Press the MENU/SET button to select DISPLAY
1
mode.
2
Use the +/– button to set the TIME mode.
3 Press the MENU/SET button for at least 2 seconds.
4 Use the +/– button to set the hours.
5 Press the MENU/SET button.
6 Use the +/– button to set the minutes.
Press the MENU/SET button at the cue of a
separate clock or time service to start the clock.
7
• The time display stops flashing and the clock
starts running.
• The current time can be set even when in STANDBY mode. Press the MENU/SET button. When the time flashes in
the display, proceed to steps 3 through 7.
• If an RDS station offers a time service the time can be set by pressing the CT button on the remote control unit while
that station is tuned in.
16
Setting the Current Time
1, 3, 5, 7 2, 4, 6
BAND
+
-
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
Flashes
MENU / SET
Flashes
+
-
(If the clock time has already been set,
that time flashes.)
The hours place flashes.
MENU / SET
(If the hours have already been set, that
number flashes.)
The hours place flashes.
- +
The minutes place flashes.
MENU / SET
(If the minutes have already been set,
that number flashes.)
The minutes place flashes.
- +
MENU / SET
The display stops flashing and the clock
starts running from 00 seconds.
Setting the Timer
The power can be set to turn on and off at a specific time or at the same time everyday, in any modes: tuner, CD,
cassette deck (optional), MD recorder (optional) and timer recording (recording to the cassette deck or the MD recorder
from the tuner or AUX input).
• The Timer Start mode may change depending on the SETUP functions of LINE1 and LINE2.
NOTE:
• Please do not change the setup function of this unit after performing the timer setup. In the event the setup
function is changed, the timer start mode may not start properly. (Please see "SETTING UP THE UNIT" on Page
12 for information about the setup function.)
CD RECEIVER UD-M31
ON / STANDBY
1, 18
Example: Setting the tuner to turn on at 13:35, off at 13:56 (with FM 92.50 MHz preset at channel 3) with
everyday timer.
Press the power operation switch to turn on the
1
system's power.
Press the MENU/SET button to set the timer setting
2
mode.
Press either the + or – button as desired.
3
• The everyday timer is selected and "EVERYDAY"
appears in the display.
4
Press the MENU/SET button.
5
Use the +/– button to set the "TUNER" mode.
6 Press the MENU/SET button.
Use the +/– button to set the preset channel
7
number.
Press the MENU/SET button.
8
• "E" and "oN" appear alternately in the display in
the steps 8 to 11.
Use the +/– button to set the hours for the timer on
9
time.
2, 4, 6, 8,
BAND
10, 12, 14, 16
- +
MENU / SET
TONE/SDB
3, 5, 7, 9,
VOLUME
FUNCTION
PHONES
11, 13, 15, 17
ON / STANDBY
Say that FM 87.5 MHz is tuned in
preset channel number " 1 ".
Flashes
MENU / SET
Flashes
+
-
MENU / SET
- +
MENU / SET
Flashes
- +
Flashes Flashes
MENU / SET
(If the timer has already been set, that
number flashes.)
Flashes Flashes
- +